For decades, our high-quality vapor recovery pumps have been ensuring safe and economical use at petrol stations worldwide. Whether belt or direct drive, classic proportional valve or modern electronic speed control - we will be pleased to advise you on the various models.
The new product series "MEX Vapor Control" is based on a direct drive and has an electronic speed control. The electronic speed control ensures that petrol vapor’s are optimally extracted and at the same time reduces mechanical wear and tear on the engine and other mechanical components, as these only deliver maximum performance when required. This ensures better energy efficiency and a longer service life. Due to the electronic speed control the proportional valve is no longer required.
This technological innovation provides you with a comprehensive vapor recovery solution for use in the petrol pump. At the same time, you are relying on a very durable vapor recovery pump, which offers a great deal of potential for the "Smart Solution" of tomorrow.
The all in one solution for your petrol pump.
The vapor recovery pump MEX Vapor Control consists of a particularly compact MEX direct drive 1-cylinder and a frequency converter, which controls the speed of the motor during vapor recovery.
For the installation and calibration of the vapor recovery system the software "DürrTronic MEX-Soft" is available to customers free of charge.
Special advantages of the vapor recovery pump MEX Vapor Control:
Electrical data | ||||||||
Type | Flow volume |
End pressure |
Relay |
Rated current |
Nominal voltage |
Frequency |
Frequency converter |
Dimensions |
V (l/min) | (mbar) | (V) | (A) | (V) | (Hz) | (V) | L x Wx H (mm) | |
0544100200 with VFD 0545100001 |
42 at 1800 rpm | ~150 | without | 0,65 | 230 3~ | 50 | 230 1~ | 232 x 160 x 209 |
Remarks:
V = Volume flow at back pressure pe = 150 mbar and a suction pressure pabs = 900 mbar
Medium to be pumped: Air
Sound level < 70 dB(A)
pabs = absolute pressure
For use in dispensers with only one dispensing side.
Electrical data | |||||||
Type | Flow volume |
End pressure |
Relay |
Rated Current |
Nominal voltage |
Frequency | Dimensions |
V (l/min) | (mbar) | (V) | (A) | (V) | (Hz) | L x W x H (mm) | |
3~Motor 50 Hz |
|||||||
0544 1000K | 53 | ˜ 150 | 24 DC | 0,75 | 380-415 | 50 | 312 x 174 x 201 |
0544 1100K | 53 | ˜ 150 | without | 0,75 | 380-415 | 50 | 312 x 174 x 201 |
0544 1700K | 53 | ˜ 150 | 220-240 AC | 0,75 | 380-415 | 50 | 312 x 174 x 201 |
1~Motor 50 Hz |
|||||||
0544 1200K | 53 | ˜ 150 | 24 DC | 2,30 | 220-230 | 50 | 367 x 174 x 201 |
0544 1250K | 53 | ˜ 150 | 220-240 AC | 2,30 | 220-230 | 50 | 367 x 174 x 201 |
0544 1300K | 53 | ˜ 150 | without | 2,30 | 220-230 | 50 | 367 x 174 x 201 |
1~Motor 60 Hz |
|||||||
0544 1400K | 44 | ˜ 150 | 24 DC | 1,80 | 110-127 | 60 | 367 x 174 x 201 |
0544 1800K | 38 | ˜ 150 | without | 1,15 | 220 | 60 | 367 x 174 x 201 |
Remarks:
V = volume flow at counter pressure pe = 150 mbar and a suction pressure pabs = 900 mbar
Pumping medium: air
Noise level < 70 dB(A)
pabs = absolute pressure
For use in dispensers with two dispensing sides.
Electrical data | |||||||
Type |
Flow volume |
End pressure |
Relay |
Rated current |
Nominal voltage |
Frequency | Dimensions |
V (l/min) | (mbar) | (V) | (A) | (V) | (Hz) | L x W x H (mm) | |
3~Motor 50 Hz |
|||||||
0544 2000K | 53 | ˜ 150 | 24 DC | 1,0 | 380-415 | 50 | 434 x 174 x 201 |
0544 2100K | 53 | ˜ 150 | without | 1,0 | 380-415 | 50 | 434 x 174 x 201 |
0544 2700K | 53 | ˜ 150 | 220-240 AC | 1,0 | 380-415 | 50 | 434 x 174 x 201 |
1~Motor 50 Hz |
|||||||
0544 2200K | 53 | ˜ 150 | 24 DC | 3,0 | 220-230 | 50 | 489 x 174 x 201 |
0544 2250K | 53 | ˜ 150 | 230 AC | 3,0 | 220-230 | 50 | 489 x 174 x 201 |
0544 2300K | 53 | ˜ 150 | without | 3,0 | 220-230 | 50 | 489 x 174 x 201 |
1~Motor 60 Hz |
|||||||
0544 2400K | 44 | ˜ 150 | 24 DC | 2,9 | 110-127 | 60 | 489 x 174 x 201 |
0544 2800K | 38 | ˜ 150 | without | 1,7 | 220 | 60 |
489 x 174 x 201 |
3~Motor 60 Hz |
44 | ˜ 150 | 24 DC | 1,2/0,7 | 230/400 | 60 | 434 x 174 x 201 |
Remarks:
V = volume flow at counter pressure pe = 150 mbar and a suction pressure pabs = 900 mbar
Pumping medium: air
Noise level < 70 dB(A)
pabs = absolute pressure
Type | Flow volume | End pressure | Recommended motor power | Max. permissible speed of rotation | Dimensions |
V (l/min) | (mbar) | (W) | (1/min) | L x W x H (mm) | |
0831-11/600 | 44 | ˜ 150 | 150 (200) | 2300 | 117 x 88 x 188 |
Accessory: belt pulley (94 mm effective diameter), replacement pumps and motors on request.
Remarks:
V = volume flow at counter pressure pe = 150 mbar and a suction pressure pabs = 900 mbar
Pumping medium: air
Noise level < 70 dB(A)
pabs = absolute pressure